Hi Nicolai,
just updated our Connect-S with the provided Bookworm image (lite) from Scratch.
The major problem is, that none of the Ethernet ports is working anymore.
"ip a" is not indicating an IPv4 Address assigned.
Any suggestions regarding this issue?
BR
Tilman
Bookworm images
Redacted as this answer was meant for another thread
Hmm, not really clear to me, what the USB power consumption should have to do with the dysfuncional Eth ports after OS update.
BTW: We did not chamge any cabling and there´s no USB devices attached.
BR
Tilman
BTW: We did not chamge any cabling and there´s no USB devices attached.
BR
Tilman
Sorry this answer was meant for another thread. Regarding your issue: was does the commanf nmcli report?
