Problems connecting IFM IO-link master to a Rev PI connect S

[Daan Hoogeveen]

I’m currently trying to connect an IFM IO-link master AL1306 to a Rev PI connect S. I was trying with a collegue to connect a IFM IO-link master AL1306 to the Rev PI however we can’t make the connection. We don’t know the solution for this problem, we used multiple instructions but can’t make a connection. Are there some extra steps we need to do to connect an IFM IO-link master to the Rev PI connect S?

[eco747]

Hi.
Did you solve your problem ? I have to do the same job.

[dirk]

Hi, okay, would you like to implement communication via the PROFINET interface? Then you can implement this with CODESYS, for example.
So IFM IO-Link master - PROFINET - RevPi Connect.
Take a look at this video tutorial about commissioning CODESYS - here I am using a RevPi Connect 4 but this also works on RevPi Connect S:

Or if you prefer to read it - take a look at the CODESYS Checklist:
https://kunbus-gmbh.atlassian.net/servi ... 2687893508

Then follow the tutorial "Example for CODESYS with a PROFINET IO Controller and a PROFINET IRT Gateway" and use your own GSDML file.