MIO "IN" LED Flashing

[ydna1979]

Probably a dumb question but I am unsure of the answer. I have my MIO module connected to the core and power supply with nothing connected to the IO pins. The IN LED is flashing red. I have read where it would do this if I have something connected wrong but I just hooked it up to get a basic configuration. Any ideas?

[giuseppe]

Hello,

Have you already configured PiCtory?
For the MIO it is important to use the latest PiCtory version.

Have a look at our checklist.
RevolutionPi Checklist

additional information:
Kunbus Video Tutorials | Tutorial 09 – PiCtory

Best regards
Giuseppe Pagano

[ydna1979]

I have gone through the checklist including the pictory checklist. I believe the issue is that i do not have power to the x2 connector but i may be wrong.

[nicolaiB]

Connector x2 is only used for io Powe on dio/di/do. On Mio it is a connector for normal ios (see documentation). Could you please share a screenshot from your pictory config of the Mio and also a photo of your setup, where all wiring is visible?

Thanks,

Nicolai

[ydna1979]

https://www.dropbox.com/s/ag557ii5t4ehs ... 1.png?dl=0[/img]

Let me know if this is what you need

Thanks

[nicolaiB]

[...] and also a photo of your setup, where all wiring is visible?

Please add the rest, too. Thanks,

Nicolai

[ydna1979]

[nicolaiB]

Looks like something went wrong with the image? At least I am not able to see anything.

Nicolai

[ydna1979]

[ydna1979]

having trouble getting the ing tag to work heres a link i tested in a browser

https://www.dropbox.com/s/k4z1g9nbsltoc ... 0.jpg?dl=0