imaging failed to proceed around 26%

Topics about the Hardware of Revolution Pi
Post Reply
User avatar
kwang
Posts: 6
Joined: 13 Jan 2021, 00:47

imaging failed to proceed around 26%

Post by kwang »

Hello there,

I have a 32G RevPi Connect+ on which I was trying to load the 2022 05 25 revpi buster image through the win32diskimager, but kept failing around 25%.
power reset didn't help either and screen capture uploaded as blow: Image

would you help to figure out what the problem is pls?
Attachments
revpi_imaging_failure.png
revpi_imaging_failure.png (28.94 KiB) Viewed 5274 times
User avatar
nicolaiB
KUNBUS
Posts: 931
Joined: 21 Jun 2018, 10:33
Location: Berlin
Contact:

Re: imaging failed to proceed around 26%

Post by nicolaiB »

Maybe the wire, which disables the hardware watchdog is missing on connector X4?

-Nicolai
u.biakoup
Posts: 212
Joined: 14 Apr 2022, 13:04

Re: imaging failed to proceed around 26%

Post by u.biakoup »

nicolaiB wrote: 06 Oct 2022, 11:27 Maybe the wire, which disables the hardware watchdog is missing on connector X4?
For more Information see here https://revolutionpi.com/tutorials/uebe ... g-connect/

Best Regards

Ulrich Kouatang Biakoup | Technical Support
User avatar
kwang
Posts: 6
Joined: 13 Jan 2021, 00:47

Re: imaging failed to proceed around 26%

Post by kwang »

jumper cable is in as pic shows.
Image

and with this same cable I have imaged the other one, on the left side in picture for many times, no any issue with it
Attachments
repvi_imaging.png
repvi_imaging.png (346.59 KiB) Viewed 5216 times
u.biakoup
Posts: 212
Joined: 14 Apr 2022, 13:04

Re: imaging failed to proceed around 26%

Post by u.biakoup »

Hallo Kwang,
I have some instructions for you.

Please use the software balenaEtcher instead of Win32DiskImager.
https://www.balena.io/etcher/
We have a new Image from 08/2022 on our homepage. You can fash it on your Device: https://revolutionpi.de/tutorials/downloads/
Maybe make sure you are using anew version of RPI Boot.
We have a Revolution Pi RPI Boot Checklist

Best Regards

Ulrich Kouatang Biakoup | Technical Support
User avatar
kwang
Posts: 6
Joined: 13 Jan 2021, 00:47

Re: imaging failed to proceed around 26%

Post by kwang »

balena didn't work either.

any idea about the root cause?
u.biakoup
Posts: 212
Joined: 14 Apr 2022, 13:04

Re: imaging failed to proceed around 26%

Post by u.biakoup »

Hello Kwang,
Have you tried with another wire?
The same problem occurs when the wire is nit stable or defective.
please try with another wire.

Best Regards

Ulrich Kouatang Biakoup | Technical Support
User avatar
kwang
Posts: 6
Joined: 13 Jan 2021, 00:47

Re: imaging failed to proceed around 26%

Post by kwang »

tried with diffrent usb cables, power reset my pc, etc.
u.biakoup
Posts: 212
Joined: 14 Apr 2022, 13:04

Re: imaging failed to proceed around 26%

Post by u.biakoup »

Hi Kwang,
Could you try with another pc? If the problem is RPI-BOOT. Please have a look on Revpi Boot checklist.

Best Regards

Ulrich Kouatang Biakoup | Technical Support
Post Reply