/var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

[darkangel]

The /var/www/revpi/pictory/projects/_config.rsc file is empty in my RevPI-Flat.
Is this normal?

[nicolaiB]

If there hasn't been any configuration by the end-user in Pitory: Yes this is normal.

- Nicolai

[darkangel]

If there hasn't been any configuration by the end-user in Pitory: Yes this is normal.

- Nicolai

Hi Nicolai,
Thank you for your response.
I was expecting the file to contain basic stuff, such as the device UUID and the LEDs mapped.
Is there anyplace I could get these info., so that I can update the _config.rsc?

[nicolaiB]

The configuration is usually done via Pictory. You can find a tutorial in our documentation: https://revolutionpi.com/tutorials/was- ... rect=en_US

-Nicolai

[darkangel]

The configuration is usually done via Pictory. You can find a tutorial in our documentation: https://revolutionpi.com/tutorials/was- ... rect=en_US

-Nicolai

Thank you, Nicolai. I will go through it.