RevPi Con CAN Schematics

[jrileycaban]

Are there schematics available for the RevPi Con CAN module?

I see the ConBridge has both SPI and UART - are both required for the Con CAN module or can I use one for other functions while still using the CAN module?

[nicolaiB]

Hi jrileycaban,

the CON module is connected via SPI. This means that you can use the UART/GPIOs for other things if you have the CAN module attached to a RevPi Connect.

Nicolai

[jrileycaban]

Thanks for the info. As for the schematics - are those available?

[nicolaiB]

No, the schematics of the CAN module is not publicly available.

Nicolai