Sercos IP Core and Sercos Stack
Sercos IP Core and Sercos Stack
I am trying to find out how Revolution Pi or Sercos III Gateway Module is using Sercos? Which library or method or hardware is it using for that? Because I want to know if I can use it as multiple slaves with one Revolution Pi or Sercos III Gateway Module? As Automata stack for SercosIII has there limitation. I want to know how can I find of this info? I search on this website, but I didn't find anything about it. Or a contact person to ask from technical team.
Re: Sercos IP Core and Sercos Stack
Hi check out this page from our knowledge base at "How much RevPi IO Modules can I connect to a RevPi".
You just have to register with your E-Mail address to access it.
The registration page is currently in German language only so here is a short animation how it works:
You can use the Modular Gateway Sercos III. You can also use Codesys for Sercos see here:
https://www.codesys.com/products/codesy ... ercos.html
You just have to register with your E-Mail address to access it.
The registration page is currently in German language only so here is a short animation how it works:
- Video.JSD.Registration GIF.gif (755.56 KiB) Viewed 1293 times
https://www.codesys.com/products/codesy ... ercos.html
