pictory does not save config

[siden]

Hello,
I have a fresh instalaltion of a revpi connect + with DIO, DI and CON CAN modules.
I COnfigured all devices once but I could not have the DI module working.
So I wanted to update the firmware, and when I removed the other devices and set the new configuration in pictory I had the following message

ressources/data/patterns/export/project.json: required JSON file not available or invalid!

The configuration is not saved and when I type piTest -d to get the devices I have:

Code: Select all

Found 2 devices:

Address: 0 module type: 105 (0x69) RevPi Connect V1.0
Module is present
     input offset: 0 length: 6
    output offset: 6 length: 5

Address: 31 module type: 97 (0x61) RevPi DI V1.5
Module is present, but NOT CONFIGURED!!!
     input offset: 11 length: 70
    output offset: 81 length: 18

I tried to remove completely and reinstall pictory but it's not worked.

I'm using the stretch release

regards

[siden]

problem solved after several manipulations. I don't know which one worked.
I removed the file /var/www/pictory/projects/_config.rsc , removed the cache from the browser and reinstall completely pictory without logiclab

[->Johannes<-]

Hi siden,

It is good to hear that you have solved your problem.
Do you want to stay on Stretch, because Buster has also been released for some time.

Regards
Johannes