Collect data from 2 PLC's with RevPi Connect +

[mas duwi]

I have tried collect data from a Siemens PLC with RevolutionPi Connect + , the data is programmed use software Bitvise SSH Client, and validate the data use software UAExpert, and it work.
Now, i want to try collect data from more than one PLC with 1 RevolutionPi Connect + , but i don't have any idea to do it.
Is anyone can give me advise for this ?

[dirk]

Hi, I understood that data is successfully transferred from a PC to the RevPi.
However, it is still unclear to me which application takes care of collecting the data from a second PLC.
Could you share more information about your setup?
For example, a network topology and a diagram with the communication partners and interfaces? So I understand that SSH is in use, but I don't understand what the actual goal of the application is.

[mas duwi]

Hi Dirk,
I don't familiar use this RevPi, this is the first time for me.
I plan to use SSH to collect the data from both PLC, is it will work ?
The network will be like these : Both PLC connect to ethernet hub - from hub connect to port A RevPi - from port B RevPi connect to PC.
The goal is to collect data from machine 1 (PLC1) and machine 2 (PLC2) to the PC (monitoring from control room).

Thanks
du wi

[dirk]

Hi du wi, How do the PLCs communicate with the RevPi? Is there a SSH interface or is that an idea?
Should the RevPi be integrated e.g. as PROFINET slave? Yes then e.g. purchase a Codesys license.

[mas duwi]

Hi Dirk
I have done succesfully collect data from 1 plc to the customer network with 1 RevPi and use SSH to communicate from PLC to RevPi, the network is like this : PLC - RevPi - PC network.
Now, i have idea to collect data from 2 plc with 1 RevPi, do you have suggestion with my idea ?

Thanks
Duwi

[dirk]

Hi is the topic still open?