Return of the ConCAN issues with CoDeSys

[f_und_e]

Hello there,

I already had some issues with the ConCAN-Device a while back, but this was before the official Codesys-Support was there. Now, I can't use it again - Codesys detects the module on the right, Pictory aswell but the CANbus/CANopen_Manager/KUNBUS_mGate throw the error "NetID 1: No CAN driver found! (error code: 16#27E2)".

Is there anything I can do to solve this? I already tried the offical tutorial https://revolution.kunbus.de/tutorials/ ... igurieren/ and read this thread viewtopic.php?f=6&t=2772&p=10119&hilit=canopen#p10119.

Any help is appreciated!


All the best

[f_und_e]

Okay, I just made a new project and now it kinda works - sometimes it's the most obvious things which help .

The Can-Device on my Bus is working, but the Kunbus mGate thing not ( SDO protocol timed out, red alert sign). Because of this, the CANopen Manager is unhappy aswell, telling me that CANopen is not running. Is this anything to worry about / is there a way to fix that?


Thank you for your help!

[->Johannes<-]

Hi f_und_e,

could you please send some more information?
Like screenshots of your configurations, image or video of your mGate, all what could be helpful.

Thank you.

Regards

Johannes