Cad Drawing for RevPi Connect+

Rund um die Hardware des Revolution Pi
nframpton
Posts: 2
Joined: 14 Dec 2019, 20:39
Answers: 0

Cad Drawing for RevPi Connect+

Post by nframpton »

Is there a CAD Drawing for RevPi Connect+? I can only find the RevPi Core drawings.

Thanks for any information!
User avatar
RR4711
Posts: 228
Joined: 22 Feb 2018, 13:28
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by RR4711 »

I would also be happy to have one!
User avatar
dirk
KUNBUS
Posts: 1926
Joined: 15 Dec 2016, 13:19
Answers: 4

Re: Cad Drawing for RevPi Connect+

Post by dirk »

Hi together, we have unfortunately no CAD drawings. But have a look at the Downloads area. There are some 3D models available. Maybe you could use them as a blueprint according to create some 3D models yourself - and maybe share them with the community ...
User avatar
RR4711
Posts: 228
Joined: 22 Feb 2018, 13:28
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by RR4711 »

The problem if one makes its own hardware its quite difficult to measure all the Offsets proper to make e.g. mouting holes in the frontpanel. I tried measuring it manually, but there is no straight surface, everything is curved and angled even if it's only a fewe degrees taper angle.

Can you try negotiate with PILZ that we at least could have the STEP Files of the Frontpanel part of the Housing (the snap on part). I understand they are worried about intellectual property and so on but its really not working out with the available data.

Markus
nframpton
Posts: 2
Joined: 14 Dec 2019, 20:39
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by nframpton »

I have asked again to PhyTools to ask on my behalf. Kunbus provide CAD Drawings for the Rev PI Core so I am sure it isn't a problem. I believe it is just a mater of time. I am stuck as well and the device doesn't not have easy corners to measure, I agree!
User avatar
dirk
KUNBUS
Posts: 1926
Joined: 15 Dec 2016, 13:19
Answers: 4

Re: Cad Drawing for RevPi Connect+

Post by dirk »

We have added new step 3d files in the downloads secion.
User avatar
RR4711
Posts: 228
Joined: 22 Feb 2018, 13:28
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by RR4711 »

The new CAD Models are even worse (sorry to say!) , they are even more simplified than the old ones! I would need a detailed Model of the front panel and at least one of the shell halves.

They are nice for planning the layout of the wiring though, so please leave them in, just add more detailed ones for the "maker people".
User avatar
dirk
KUNBUS
Posts: 1926
Joined: 15 Dec 2016, 13:19
Answers: 4

Re: Cad Drawing for RevPi Connect+

Post by dirk »

Hi, there are news about your request for 3D data.

In the download area under "Revolution Pi STEP files" you can find new data for the modules:

RevPi Compact
RevPi Connect
RevPi Core
RevPi DIO

https://revolution.kunbus.de/tutorials/downloads/
volz
Posts: 30
Joined: 22 May 2018, 12:27
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by volz »

Hi,

would you be able to post the 2D drawings of all the devices as well?

Cheers
User avatar
RR4711
Posts: 228
Joined: 22 Feb 2018, 13:28
Answers: 0

Re: Cad Drawing for RevPi Connect+

Post by RR4711 »

RR4711 wrote: 30 Nov 2020, 12:32 The new CAD Models are even worse (sorry to say!)
Any updates here?
Post Reply