Hi Steffen, thank you very much for your detailed description of the problem. Yes, unfortunately, the Wi-Fi connection on the Revolution Pi currently seams be limited on 5.4 GHz at the moment.
We are working on understanding the issue in detail.
Search found 1911 matches
- 07 Mar 2024, 09:04
- Forum: Software
- Topic: RevPi Connect 4 Wifi 2.4Ghz problems
- Replies: 10
- Views: 2034
- 07 Mar 2024, 08:59
- Forum: Connectivity
- Topic: WLAN Verbindung
- Replies: 4
- Views: 999
Re: WLAN Verbindung
Hi Verhoeven, momentan funktioniert die WLAN-Verbindung nur eingeschränkt. Mit 5.4 GHz sollte es funktionieren.
Edit: probiere diesen Kniff - damit funktioniert auch die 2.4 GHz WLAN-Verbindung bei uns:
Edit: probiere diesen Kniff - damit funktioniert auch die 2.4 GHz WLAN-Verbindung bei uns:
Code: Select all
sudo revpi-config enable external-antenna
sudo reboot
- 06 Mar 2024, 09:23
- Forum: Software
- Topic: Node-red im Browser starten (Docker)
- Replies: 5
- Views: 2028
Re: Node-red im Browser starten (Docker)
Hi Andreas, kannst Du es probieren mit RevPi Bullseye 64-bit Lite (02/2024) (ID: 7790) und darauf Dein System frisch aufsetzen z.B. mithilfe dieser
Node-RED Checklist
Node-RED Checklist
- 05 Mar 2024, 15:35
- Forum: Software
- Topic: SDM630 Modus Zähler
- Replies: 7
- Views: 1055
Re: SDM630 Modus Zähler
Hallo, fpfeifer ich habe mir diese Anleitung angeschaut. Ab Seite 40 beginnt die Einstellung der RS485 Schnittstelle. Einfach step-by-step die Werte der Schnittstelle vergleichen, dann sollte die Kommunikation funktionieren. Baudrate, Datenbits, Stopbits, Parität, Adresse … Im Bild kann ich sehen, d...
- 04 Mar 2024, 12:08
- Forum: Hardware
- Topic: MIO and Too many communication errors
- Replies: 4
- Views: 847
Re: MIO and Too many communication errors
Hi mitchellday06 > Hey thanks for that. I will be on site today and can do that. Ok >As the system is installed can I do the module upgrade as an entire system, or do I need to attach only the on module at a time? Yes, you disconnect all modules but the one you want to update - here is the documenta...
- 01 Mar 2024, 14:23
- Forum: Hardware
- Topic: AIO module RTD precision for temperature
- Replies: 5
- Views: 4628
Re: AIO module RTD precision for temperature
Hi FMW, I have successfully measured with a RevPi AIO Module and a 4-wire PT1000 temperature in steps of 0.1°C. pi@RevPi99988:~ $ piTest -r RTDValue_1 2 Byte-Value of RTDValue_1: 222 dez (=00de hex) 2 Byte-Value of RTDValue_1: 222 dez (=00de hex) 2 Byte-Value of RTDValue_1: 222 dez (=00de hex) 2 Byt...
- 29 Feb 2024, 15:46
- Forum: Hardware
- Topic: RevPiLED - Relais
- Replies: 7
- Views: 1009
Re: RevPiLED - Relais
Hi Stefan, Das Problem kann darauf zurückzuführen sein, dass GPIOs_A_B im Codesys-Gerätebaum nicht deaktiviert sind. CODESYS FAQ | The LEDs on the RevPi Connect are controlled, although my program does not use them, what can I do? Das folgende Programm testet das Ein- und Ausschalten des Relaisansch...
- 29 Feb 2024, 10:24
- Forum: CODESYS
- Topic: Über CODESYS mit ConCAN Modul RAW CAN Telegramme verschicken
- Replies: 4
- Views: 690
Re: Über CODESYS mit ConCAN Modul RAW CAN Telegramme verschicken
Hi Wiekon Du kannst Dir mal dieses Tutorial anschauen, hier kannst Du sehen, wie Du direkt auf der Shell CAN Telegramme über den Bus schicken kannst
https://revolutionpi.com/de/tutorials/u ... -ansteuern
https://revolutionpi.com/de/tutorials/u ... -ansteuern
- 29 Feb 2024, 10:23
- Forum: Hardware
- Topic: Having a Raspberry pi 4 connect with Connect 4
- Replies: 1
- Views: 458
Re: Having a Raspberry pi 4 connect with Connect 4
Hi Ok_ing take a look at this download "Arduino Coupling" maybe this is a solution:
https://revolutionpi.com/en/tutorials/downloads#coding
https://revolutionpi.com/en/tutorials/downloads#coding
- 29 Feb 2024, 08:23
- Forum: Software
- Topic: revpi user logon Codesys
- Replies: 1
- Views: 482
Re: revpi user logon Codesys
Hi Debian Buster or ramzi (?) I can understand your astonishment. So this change is related to updates of the CODESYS ecosystem, which includes user authentication. Take a look at this tutorial, which implements a "Blinking Light": https://revolutionpi.com/en/tutorials/beispiel-blinking-li...