Hi Johannes

I think I am at the end of troubleshooting that my time allows. Do you have an RMA process that I can return this device through please?

Thanks

Ray

Hi Johannes Yes, I tried my home PC which does not have the same restrictions / policies etc as my work PC, but it did not work. RPIBoot completes as before, but no USB storage drive is shown. I followed the links in the second document which lead me back to the RasPi compute module reprogramming do...

Hi Johannes Thanks for the advice. I can get this response when using RPIboot: Waiting for BCM2835/6/7/2711... Loading embedded: bootcode.bin Sending bootcode.bin Successful read 4 bytes Waiting for BCM2835/6/7/2711... Loading embedded: bootcode.bin Loading embedded: bootcode.bin Second stage boot s...

Hi I have had a RevPi Core 3 set up as a soft PLC monitoring devices on an IO-Link network for some time. Yesterday the display showed something about the disk being full and requiring attention. I disconnected the device and have come to debug it today. The RevPi does not seem to work at all. The p...

Thanks Simon. Here's where I am so far! I have flashed a new Stretch image, factory reset the device and run "apt-get upgrade". I have found that I cannot ping anything from the RevPi, so I think this may be blocked and therefore have not been able to tell if the NTP server is accessible. ...

Hi Simon Sorry for the long delay - moved on to a different project, but back again now. As before, running sudo timedatectl status would result in Failed to query server: Invalid argument . However, I then set the clock to the correct time/date using sudo timedatectl -s "2019-12-02 14:34"...

Hi did you install a new image and did not execute "revpi-factory-reset" afterwards? Hi Dirk I don't think so (this device has been used before). Is this what I should do? The clock seems to stay correct between consecutive reboots, but when left off over the weekend and turned on again M...

Hi I would like to connect the HDMI output of the RevPi to a local screen and display the webvisu. I have seen some older posts stating this is possible, but I have tried with no success. See: https://forum.codesys.com/viewtopic.php?t=6077 Has anyone done this with a RevPi or could they assist? UPDA...

Hell Ray The commands I use are : Code: Select all sudo date -s "yyyy-mm-dd hh:mm" sudo hwclock -w Regards Hi Thanks, but I have tried this and whilst setting the date/time works, I receive an error: pi@RevPi12101:~ $ sudo hwclock -w hwclock: ioctl(RTC_RD_TIME) to /dev/rtc to read the tim...

Hello all I hope this has a simple answer, but I have spent hours looking for a solution and I am now more confused. My RevPi has the wrong time and date. I can set it correctly using " sudo date -set ...." but the next day it is incorrect again. I understand that the RevPi has a 24h (min....