Hi Volker,

great! Thank you!

Dear RevPi team, the RevPi Core 3 module has been tested by you in accordance with EN61131-2 and 61000-6-x. Volker mentioned in https://revolution.kunbus.de/forum/viewtopic.php?f=3&t=363 that the PiBridge uses a transmission rate of no more than 1 MBit/s (due to EMI issues above that rate). I wo...

Hi Volker, thank you for your detailed explanations. So trying to design a costum AI module with data rates of 10Mbit/s and more would be fruitless effort from the start? Because that is what I was aiming for.... Not to talk about processing and possibly streaming data via a gateway module Regarding...

Hello,

when I right-click on a module in PiCtory and click "Show Datasheet" nothing happens. Do I have to configure something beforehand?

PiCtory: 1.2.2 onRevPi Core3

Dear RevPi Community, the internal Ethernet bus on the PiBridge is realised by two Micrel KSZ8851SNLI ICs, one for each side. It is controlled via a 40MHz SPI bus. Thus, the maximum achievable thoughput is theoretically 40Mbit/s. I wonder what throughput is achievable on the internal bus and hence o...