Hi ejensen, I have tried it with kernel "1:9.20220524-5.10.103+revpi1"(which is the same as it on your device, as I see it in kernel log from you) on my Compact, the problem is not reproduced. However, I put almost no load on it, and not too much operations on it. I would like to ask, 1. a...

Hello,

I will check it on my devices and go back as soon as I get something.

BR
Simon

Hello EdS, as the "apt update&apt upgrade" getting executed, the pictory (and revpi-webstatus) are upgrade from 1.x to 2.x. The version 2.x contains following changes: 1. the DocumentRoot of pictory web application changed from /var/www/ to /var/www/pictory 2. the tcp port of the picto...

Hi Songha,

Could you pls maybe post (part of) your RAP file here, to make us can debug with the same problem you have exactly ?

BR
Simon

Hello Robert, Probability the reason of the problems is that the capacitor of one device was used up, while the other is not. The RTC chip which holds the time is supplied by a super capacitor. When the capacitor is used up, the time of the device is unpredictable. From the information you provided ...

Hi,

On a RevPi Connect, there is another possibility for the rebooting - the Watchdog is not feed, which can be deactivated by wiring terminals 6 and 7.
More detail can be found in https://revolution.kunbus.com/tutorials ... rect=en_US

Regards,
Simon

Hi a.alvsantos,

this maybe what you need: https://www.linuxjournal.com/content/snmp
all the commands used in this link are contained in deb-packets: snmp snmpd snmp-mibs-downloader, which can be installed with "sudo apt install snmp snmpd snmp-mibs-downloader"

regards,
Simon

Hallo Mike, I think you are talking about two issues, one is failed to upgrade from jessie to stretch, the other one is failed to flash the image from windows 10 pro, am I right? For the upgrading, I think if you can post some detail steps you've done, maybe we can give you more help. For the flashi...

Hi Barney, from the picture of dmesg you've posted, the "write error 5; piIoComm_sendRS485Tel(PiIoStartDataExchange) failed 1" indicates that the communication over pibridge was failed. Some more check on the pibridge plug might be help to fix this problem. As the kernel log during pibridg...

Hi RMeissnerCC, in the field environment, I always try to use a industrial level product, which normally might be with some enhancements in power supply, EMI, etc. e.g. https://revolution.kunbus.de/shop/de/industrial-usb-hub-4-port However, concerning to this specific problem, it isn't yet quite sur...